Product Finder

September 19, 2013

ERNI Electronics Introduces Extremely Compact Angled M12 PCB Connector

ERNI Electronics has added an innovative 90 degree version of the M12 connector to its M12 product line.

Solutions for standard applications (pin and socket) and for M12 sensor tubes (pin) are available. The new angled M12 connectors are the first of their kind that are suitable for automated Pick&Place assembly and reflow soldering processes. They can be processed cost-effectively on an SMT production line. Versions with 3, 4 or 5 pins are available; 8-pin variants are under development.

The new angled M12 connectors are extremely compact thanks to their central position at the edge of the PCB. They also have integrated PCB supports in order to adapt to three popular PCB thicknesses (1.0mm, 1.6mm and 2.0mm). Socket and pin versions have been realised with the same layout, and can also be used for housings with an integrated M12 thread. Versions with A, B and D coding are available. 360 degree shielding will also be optionally available later. The shielding ring is soldered to the PCB with two soldering pins. Three contact lugs arranged on the circumference provide the electrical contact with the M12 screw. The high degree of robustness due to THR technology and outstanding leakage current resistance with a CTI value (Comparative Tracking Index) of 600 also predestines the M12 connector for harsh industrial environments. An optional O-ring additionally makes it possible to encapsulate the assemblies.

The new angled M12 connectors also have many processing advantages, such as delivery in T&R packaging for automated Pick&Place assembly integrated suction surface, reliable positioning using pins and integrated PCB supports that reliably prevent tilting during processing. The connector can also be fitted to the back of a ready-equipped PCB in a housing. The new M12 connectors can be fitted using lead-free reflow soldering and provide protection class IP65/67 when they are plugged in or screwed on.

As well as the solutions for standard applications, pin-type connectors are available that are specially aimed at sensor applications. These new 90-degree M12 connectors are specially designed for M12 sensor tubes, have an extremely short design with 14 mm and are supplied with an O-ring as standard in order to provide encapsulation capability. The fully equipped PCBs are inserted into the sensor tube as far as they will go. The stop is provided by the collar on the connector, which is typical of these applications. Other options such as anti-twist ridges and a snap-in function are also available for these versions.

The new angled M12 connectors address a wide range of industrial applications such as fill level sensors, range sensors and pressure sensors, light barriers, position switches, field bus and peripheral equipment and measuring sensors.

ERNI Asia Holding Pte Ltd

23A Serangoon North Avenue 5


554369 Singapore


ERNI Electronics GmbH & Co. KG

Seestraße 9

73099 Adelberg


TE Connectivity Corporation

1050 Westlake Drive

19312 Berwyn, PA

United States