The ERNI Purchasing Program
ERNI Electronics GmbH in Adelberg procures different goods and services for approximately 75 million Euro. Ten percent of this volume is from abroad with a strongly increasing tendency.
Approx. 81 % of the total purchase volume is needed for our production with emphasis on the purchasing program mentioned below. For this wide range of quality products the ERNI Electronics GmbH is seeking high-performance suppliers to partner us to meet our high expectations regarding quality, cost, innovation, and service. We would ask you to look at the listing below and comment on whether you feel your companies know-how and competitiveness can assist ERNI’s long term planning.
| Purchasing Program | Picture | Material | Measurement / Process technique / Quality | Purchasing volume |
| Plating |  |
Au Ag Sn Zn Ni |
Strip and barrel plating. Electroplating and chemical plating. |
app. 14 mill. Euro |
| Stamped and bent parts |  |
CuZn CuSn CuNi Steel A2 |
With toolmaker's shop Multistage operation tools |
app. 8 mill. Euro |
| Molded Parts |  |
PBT PC LCP ABS PCT |
With toolmaker's shop Max. 100 x 50 x 40 mm |
app. 3.5 mill. Euro |
| Base metal / strips |  |
CuZn CuZn milled CuSn CuSn milled CuNi |
app. 6 mill. Euro | |
| Plastics / resin |  |
PBT PC LCP ABS PCT |
UL Listing (yellow card) | app. 3 mill. Euro |
| Packaging material |  |
Wooden and plastic reels Cardboard boxes and fillings Foam material fillings Labels etc. |
Antistatic | app. 1.5 mill. Euro |
| Turned parts |  |
CuNi CuZn Steel A2 with or without plating |
Splinterless Diameter: max. 10 mm |
app. 1.3 mill. Euro |
| DIN and ISO material |  |
Steel A2 CuZn with or without plating |
AQL 0,65 Splinterless Diameter: max 10 mm |
app. 0.5 mill. Euro |
| Special contacts |  |
CuNi 1 Pb 1 P | Turned contacts with electroplated surface (Au) Diameter: max. 6 mm |
app. 2.5 mill. Euro |
| Electronic components |  |
Resistors Resistor nets Capacitors Diodes Inductivities IC’s etc. |
app. 4.8 mill. Euro | |
| Insertion technology |  |
SMD-production Through-hole production |
app. 1.8 mill. Euro | |
| Subrack |  |
Al A2 Steel coated with Zn |
- 19” technology assembly - plate-bending construction |
app. 3 mill. Euro |
| Printed Circuit Board |  |
FR4 | Double sided to x layer All surfaces Cu: max. 105 mm Thickness: 3.2 mm Backplanes etc. |
app. 6.5 mill. Euro |
| Tools |  |
Tools for molded, stamped and bent parts. Experience in the connector market. With production capacity. |
app. 7 mill. Euro | |