ERNI Pressinformation

ERNI Electronics Debuts Robust, Right Angled D-Sub Connector With Press-Fit Termination

ERNI.com — 2008-11-25T03:33:00+01:00

ERNI Electronics Debuts Robust, Right Angled D-Sub Connector With Press-Fit Termination

I/O connector is screwed to the PCB for a more secure hold

Adelberg, November 25, 2008 – ERNI Electronics has introduced a new connector to its comprehensive range of D-Sub connectors with SMT, THR, press-fit and soldering termination. The latest addition to the product family is a right angled D-sub connector with press-fit technology, which can be screwed to the PCB with M3 or 4#40 UNC threads after press fitting. In comparison to standard press-fit clips, this makes the attachment even more secure. This is particularly important in applications where the PCB is subjected to additional force due to the use of larger and heavier cable housings.

Press-fit technology has certain processing advantages when used on backplanes and PCBs that cannot be reflow soldered, or in cases where large quantities of other press-fit connectors such as DIN 41612/IEC 60603-2 or 2.0mm HM connectors are being used on the same PCB. However, press-fit technology is also an effective solution in situations where connectors’ high heat capacity causes soldering problems (small components overheat). Press-fit technology is also characterized by being more reliable than soldering technology.

The new right angled robust D-Sub press-fit connector is already available with a standard assembly height of 7.3 mm, and will shortly be followed by a Eurostyle version with an assembly height of 3.6 mm. The connectors are available with 9, 12, 25 or 37 pins. The male contacts are gold-plated, and the female contacts are tin-plated. The family of connectors complies with the IEC 807-3 and DIN 41652 standards, and is suitable for lead-free soldering (RoHS compliant).

The integrated locking accessories (“jack screws”) provide a low-impedance ground connection, and also reliably anchor the cable housing to the connector. Versions are available with threads (M3 or 4#40 UNC) and threaded bolts (M3 or 4#40 UNC).

Further details on the comprehensive range of D-Sub products from ERNI Electronics are available in a product catalogue that is available for download from the Web site:
http://www.erni.com/DB/PDF/TMC/ERNI-D-Sub-Connectors-e.pdf

Prices for the new D-Sub begin at $1.0 for the 9-pin version (male or female).

About ERNI Electronics

ERNI Electronics is a leading global manufacturer and worldwide supplier of a broad line of interconnects for the telecommunications, data communications, computer, industrial and medical markets. ERNI has manufacturing operations in Europe as well as sales offices in over 40 countries. ERNI products are also marketed via a worldwide network of representatives and leading distributors. Further information is available at www.erni.com.

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI Electronics Expands M8/M12 Portfolio To Include Passive I/O Distribution Boxes

ERNI.com — 2008-11-24T03:33:00+01:00

ERNI Electronics Expands M8/M12 Portfolio To Include Passive I/O Distribution Boxes

Now providing complete solutions to connect field devices with control units

Adelberg, November 24, 2008 - ERNI Electronics has expanded its M8/M12 product line with the introduction of a line of passive I/O distribution boxes. Complementing its industry-proven M8/M12 cable assemblies and field-attachable connectors, ERNI is now offering, in conjunction with I/O distribution boxes, another key element in the information chain between field devices and control level. The I/O modules are highly utilized in the area of industrial automation, especially as they avoid the use of parallel cabling and complex installation involving control units or switch cabinets. Instead of using numerous standalone cables, sensors and actuators can be directly connected in close vicinity to the machine or process. The concept of decentralized modules and a more structured installation enables sensor/actuator lines to be easily, quickly and securely replaceable.

All ERNI M8/M12 distribution boxes with UL/CSA approval are designed for IP65/IP67 protection, and are built for use in harsh and humid industrial environments. The housing is available in a variety of port numbers and is robustly built to withstand oil, lubricants and vibration in the harshest of environments. A range of mounting holes gives the option of direct attachment, and ensures the close proximity of the installation to the process. The control level is connected by a pre-assembled trunk cable available in different standard lengths. Designed as a hybrid cable, it acts as both the power supply and the data link for sensors and actuators connected to the I/O box.

The M8 I/O boxes are available with 3-pin and 4-pin sockets and with 4, 6, 8 and 10 ports, and the M12 I/O boxes ship with 4- and 5-pin sockets (A coded) and 4 respective 8 ports. All boxes utilize LEDs to display the status and operation mode of the I/O ports, and every port is equipped with a removable identification label. ERNI supplies PUR insulated cables in standard lengths of 3, 5, 10 and 15m. The cables demonstrate a high resistance to oil, gasoline and chemicals, and are abrasion resistant and drag chain capable.

Prices begin at $45 for the M12 4-port version with 3m trunk cable.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

MiniBridge Cable Connector System Expanded

ERNI.com — 2008-11-11T03:33:00+01:00

MiniBridge Cable Connector System Expanded

ERNI Electronics now also offers 10 and 12-pin designs

Adelberg, November 11, 2008 – The single-row 1.27mm pitch MiniBridge cable to board connector system from ERNI Electronics got high market acceptance in many high-current, high-reliability and space-saving products including demanding LED requirements. Applications for compact and flexible board-to-cable connections are virtually limitless from multiple applications including sensor, actuator, power supply or data applications in automotive and industrial electronics, computer technology, consumer electronics or medical engineering. Despite the small dimensions, the miniature MiniBridge solution offers a current carrying capacity of up to 4A per contact (at 20 °C, depending on the cable). In addition to the previously introduced pin numbers of 2, 3, 4, 6 and 8, ERNI introduces 10 and 12-pin designs further expanding the range of applications.

The MiniBridge cable connectors can be used in an expanded temperature range extending from -55 to +125 °C. The male connectors have SMT terminals with SMT mechanical board anchors, while the female connectors are terminated via insulation displacement on the cable. Vertical and angled male connectors and female connectors with a 90-degree and 180-degree cable outlet open the door to a number of mating configurations. In addition, the female connectors are available with two different locking features; a friction lock for normal vibration/shock load of stationary applications (black connector design) or a positive lock for high vibration/shock loads of mobile applications (red connector design). On the more robust design (red), the locking system can only be released using a tool (small screwdriver).

The MiniBridge male connectors are available in tape-on-reel packaging and are suitable for assembly in lead-free reflow soldering processes (RoHS-compliant) via their LCP plastic housing material. The IDC female side is designed for conductors with AWG 26 (wire or strand) and is provided by ERNI as a finished assembly. Several cable options are available, including ribbon and discrete wire, as well as cable types including PVC, high temperature TPE-ET and Halogen Free TPE-O solutions. ERNI delivers completely pre-manufactured 100 %-inspected cables around the world. Please contact ERNI with your specific requirements.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI Electronics Offers Blind-Mate MicroSpeed Connector

ERNI.com — 2008-11-11T03:33:00+01:00

ERNI Electronics Offers Blind-Mate MicroSpeed Connector

Blind-mate designs ensure robust connection

Adelberg, November 11, 2008 – ERNI Electronics has expanded its MicroSpeed family to include a new Blind-Mate version for mezzanine card applications. The MicroSpeed connector is a 1.0-mm pitch system using SMT technology for data rates up to 10Gbit/s. The MicroSpeed is available in 50 signal contact modules and is designed to be used in multiples between two parallel cards without mating issues from negative tolerance stack up. The MicroSpeed design advantage allows many smaller connectors to be used to shorten PCB traces, reduce PCB layers and even improve system airflow by providing a narrow profile. Two rows of 50 signal contacts with perimeter shielding present an ‘open pin field’ design suitable for differential and single-ended requirements.

The new Blind-mate designs have integrated guide pins with higher displacement tolerances to stop incorrect, forced connections. Reinforced housing side walls absorb the larger forces that may result from virtual "blind mating" to prevent connector damage while providing a positive connection. This characteristic offers advantages specifically with larger, heavier PCBs which can be connected without additional board guides. MicroSpeed Blind-mate will initially be introduced in the standard height of 1 mm for the male connectors and 4 mm for the female parts for a combined 5 mm board-to-board height. Additional heights of the MicroSpeed Blind-mate as well as additional heights of the MicroSpeed PowerModule are planned. Please contact ERNI Electronics for additional information.

The SMT or SMT/THR version ensures fully automatic processing using the conventional SMT assembly and reflow-soldering process. The longitudinal pitch of MicroSpeed connectors is 1 mm and the transverse pitch is 1.5 mm (for impedance purposes). Differential signal pairs can be arranged horizontally or vertically. Optimized crosstalk behavior is achieved with a parallel configuration of the signal pairs (in the longitudinal direction) and the pairing arrangement of signal and shield contact pairs.

The standard MicroSpeed is available in 16 different stack heights or board-to-board heights from 5 mm up to 20 mm with every height in between in just 1 mm increments. Yet all these heights are achieved by ‘mixing and matching’ four different male and four different female connectors. At the same time, the perimeter shielding provides robust SMT or THR mechanical strain relief for the most reliable soldering experience possible. MicroSpeed male and female connectors are supplied in tape-on-reel packaging. Additional design features for fully automatic assembly are: Black insulating bodies made of LCP for fast and reliable visual recognition as well as a pre-mounted placement aid for easy gripping.

DemoBoards, SPICE models and an evaluation kit are available for the MicroSpeed connectors.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI Forges Alliance to Strengthen Presence in Northern China

ERNI.com — 2008-10-23T03:33:00+01:00

ERNI Forges Alliance to Strengthen Presence in Northern China

Beijing Broadcasting & Telecom Technology is appointed ERNI distribution partner to harness growth potential in key international market

SINGAPORE – October 23, 2008 – ERNI, a leading international provider of electronic connectivity solutions, today announced a new distribution agreement with Beijing Broadcasting & Telecom Technology, located in Beijing, China. Recognizing the tremendous growth opportunity and design and R&D potential in Northern China, the partnership signifies ERNI’s aim to strengthen its presence in the region.

Through the combined resources of Beijing Broadcasting & Telecom Technology and the local ERNI sales office in Beijing, the extended ERNI team will have the leverage to expand the company’s reach in Northern China, while remaining focused on and attentive to the needs of the existing customer base.

"We see tremendous growth in the Northern China markets reaching across many industries," said Dr. Chris Bruhwiler, CEO of ERNI Asia. “With the ongoing support of our own sales office in Beijing, this collaboration will build awareness for ERNI solutions and strengthen our presence in Northern China.”

Beijing Broadcasting & Telecom Technology is a distributor of electronic components and instrumentation equipment headquartered in Beijing, China. Founded in 2002, the company is led by general manager Tom (Shao Yu) Gan and staffed by a team of approximately 20 employees.

About ERNI Electronics

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

New PCI Express Connectors Edge Into Tight Spaces

ERNI.com — 2008-10-15T03:33:00+01:00

New PCI Express Connectors Edge Into Tight Spaces

ERNI Electronics introduces right-angled card edge connectors designed for use in space critical applications

ADELBERG, GERMANY – October 15, 2008 – ERNI Electronics is offering a new 1mm centerline PCI Express (PCIe) connector family that includes X1 (36 pins), X4 (64 pins), X8 (98 pins) and X16 (164 pins) right-angled connectors. These card edge connectors are designed to meet the requirements of PCI Express architectures that call for a high performance point-to-point full duplex I/O Bus connector. While most PCI Express connectors available in the market are vertical, the new ERNI PCIe connectors are right-angled, which is ideal for solving space problems in applications where low clearance above the PCB prohibits the use of vertical configurations.

ERNI right-angled PCIe connectors provide board-to-board distances ranging from 5.84mm to 16.68mm, and are compatible with 1.6mm to 2.4mm thick motherboards and 1.6mm thick daughter cards. These robust PCIe connectors are available in 3 stack heights of 5.84mm, 11.17mm and 16.68mm, and are equipped with molded polarization keys to prevent improper insertion of the daughter cards. The connectors provide solder termination with a termination length of 2.54mm.

The PCIe connector layout is arranged in a 4-row format with 2mm pitch and the provision of 2 holes for locater pegs. This enables the connector to be securely assembled and easy soldered through a lead-free wave soldering process.

Each serial link supports 2.5Gb/s (per direction) in 100W Gen1 systems. The connectors, which are available in black and in tray packaging, are ideal for use in many applications, including servers, workstations, desktop PCs (replaces AGP) and storage applications.

The price for PCI Express (PCIe) R/A, X1, 36 position starts at $6.28 in volume. For more information or to download our catalog, please visit the ERNI Website at www.erni.com.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI MaxiBridge Cable Connectors Power Past Industry Expectations

ERNI.com — 2008-09-30T03:33:00+01:00

ERNI MaxiBridge Cable Connectors Power Past Industry Expectations

Extended features deliver unmatched power in a highly compact format

ADELBERG, GERMANY – September 30, 2008 – ERNI Electronics has expanded its MaxiBridge™ cable-to-board connector family to include an enhanced set of positions and configurations. The complete portfolio now includes vertical and right-angled SMT male connectors in 2, 3, 5, 6 and 8 pin versions. Unmatched in the industry today, the single-row connector (SRC) provides a remarkable 12 Amperes per contact in only a 2.54mm pitch. Similarly, the 8-pin version can handle up to 96 Amperes. With a mated height of just 5mm when used in the right angle configuration, the MaxiBridge is truly in a class by itself. The product’s competitive pricing allows MaxiBridge to be used in virtually any automotive, industrial or consumer application that demands top-level protection from vibration or accidental unmating. Current applications include LED automotive lighting and displays, industrial sensors and actuators, fans, power supplies, LCDs, TFTs, handheld units, control panels, and a host of others.

The level of detail incorporated into ERNI products continues with the MaxiBridge™ cable-to-board connector family. Connectors are built with durable SMT metal anchors to ensure high retention and strain relief forces. The female cable housings and corresponding crimp contacts utilize a primary and secondary lock feature that exceeds the load requirements for vibration/shock and high tensile forces from the cable. Although the connector is easily disconnected by hand, accidental un-mating is prevented through the provision of dual housing locks that must be operated simultaneously.

The MaxiBridge connector family is designed with four mechanical keying options in four different colors (red, green, black and blue) to guarantee fast, accurate installation that completes with a loud audible click. The female connector crimp contacts are designed for cables with AWG 24, 22 and 20 (wires or strands). The contacts for AWG 18 and 16 will be available shortly.

The MaxiBridge crimp contacts feature the most durable design for hostile environments, a double-sided spring contact for ultra-reliable active pressure on the male pin. To guarantee a perfect connection, the male pin is guided by selective gold plating in the contact area, fully coated contacts (without blank stamped edges that may corrode), and a solid female structure.

The MaxiBridge connector system is designed for fully automatic assembly on SMT assembly lines. The SMT male connectors are available in tape on reel, and the housing material can withstand the high temperatures associated with lead-free reflow soldering processes (RoHS-compliant).

Pricing for the MaxiBridge 2 pin mated pair starts at $1.00 in volume.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI Reaches New Heights With Enhanced SMC Board-to-Board Adapter

ERNI.com — 2008-07-30T03:33:00+01:00

ERNI Reaches New Heights With Enhanced SMC Board-to-Board Adapter

Stretches flexible mezzanine distances from 20mm to 40mm

ADELBERG, GERMANY – July 30, 2008 – The latest SMC Board-to-Board-Adapter from ERNI Electronics is an exciting addition to the extensive SMC 1.27mm (.050") pitch connector line, offering impressive flexibility in its board-to-board heights ranging from 20mm to 40mm in 2mm increments. Available in 12, 26 and 50 pins, the SMC Adapter has male contacts on both component ends, and securely locks into a standard low profile SMT female SMC connector for a robust assembled solution.

The SMC Adapter attachment is further enhanced by the extraordinary design details incorporated into every SMC connector. The required low profile female connectors are specially designed for use with pick & place technology. Secure soldering is maintained with SMT coplanarity of <0.10mm (<0.004") and integrated metal SMT mounting clips for durable mechanical stress relief. To protect the daughter card from handling mishaps, the SMC Adapter can be attached during the end-of-assembly process. Manufactured with high temperature LCP, SMC Adapters have an operating temperature range of -55°C to + 125°C, and are offered in cost-effective antistatic tray packaging.

The data sheet containing specifications for the new SMC adapter is available for download from the ERNI Web site at: http://www.erni.com/DB/PDF/SMC/ERNI-SMC-Adapter-e.pdf.

Pricing & Availability

The new SMC adapters are available immediately and prices start at $2.00 per piece.

An Overview of the SMC family

The SMC line of versatile 1.27mm (0.50") connectors offers incredible design flexibility not found in any other comparable connector. Male and female connectors are available in a variety of vertical heights from 8mm board-to-board to 20mm, as well as additional heights of up to 40mm offered by the newly released SMC Adapter. Male and female connectors are also available in right angle design, enabling mating combinations for every type of application including extender cards, perpendicular cards and mezzanine cards. SMT, Pressfit and IDC cable termination options give users the capacity for an optimal assembly design. Also, with precision stamped, dual beam ‘spring style’ female contacts, ERNI guarantees misalignment tolerances of 0.7mm in both the longitudinal and transverse axes, providing users with the flexibility to place multiple mezzanine connectors between two boards. ERNI’s award winning contacts also provide a generous wipe length of 2.5mm, allowing the SMC mated height to be ‘stretched’ with no loss of signal integrity, as well as a minimum of 500 mating cycles. Most styles are available in 12, 26, 50, 68 and 80 positions. The connectors are produced on state-of-the-art, fully automated manufacturing machines at ERNI’s factory in Adelberg, Germany. Due to the high contact density and small housing required, SMC connectors are ideal for compact applications.

Contact ERNI today for samples and the latest SMC brochure. Expect more from your connectors. Exceed your expectations with ERNI.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

Enhanced Design Offers Significant Benefits to ERNI Family of Right Angled Female DIN Connectors

ERNI.com — 2008-07-23T03:33:00+01:00

Enhanced Design Offers Significant Benefits to ERNI Family of Right Angled Female DIN Connectors

Reduced press-in-force diminishes stress on PCB

ADELBERG, GERMANY – July 23, 2008 – ERNI Electronics, the pioneer of DIN 41612/IEC 60602-3 connector technology, has redesigned its right angle female DIN connectors for daughter card applications. The fresh design approach delivers a number of key benefits relating to reliability and efficient assembly.

ERNI’s latest family of right angled DIN 41612 connectors is available in type R, R/2 and R/3 variants. By using the "Eye of the Needle" pressfit zone, the press-in force is reduced by approximately 25 percent, resulting in less stress on the PCB and increased reliability. An Automated Optical Inspection (AOI) step during the manufacturing process ensures 100% controlled pin quality.

Regarding the mating face and the termination side, ERNI’s new connectors are fully compatible to existing versions. The implementation in current series is possible without changing the layout.

A press-in cover used on every pressfit version enables the type R female connector to be pressed in with a cost effective flat rock press-in tool, without damaging the contacts.

All type R connectors are suitable for use with a simple coding mechanism that uses coding tabs. The RoHS compliant Through Hole Reflow (THR) versions are built from a high temperature resistant material that makes them capable for reflow soldering. Manufactured to the highest possible standards in Adelberg, Germany, ERNI’s newly designed family of Right Angled Female DIN connectors is priced for a global marketplace with a price per piece of approx. $2.80.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

Power D-Sub Connectors for SMT, Through-Hole and Pressfit applications

ERNI.com — 2008-06-03T03:33:00+01:00

Power D-Sub Connectors for SMT, Through-Hole and Pressfit applications

3W3, 3WK3, 7W2 configurations with robust stamped power contacts

Adelberg, June 03, 2008 – ERNI Electronics is offering an extensive range of D-Sub connectors with precision stamped high-current contacts to meet the needs of SMT, Through-Hole Reflow (THR) and Press Fit applications. Expensive screw-machine power contacts are no longer necessary to achieve high-current demands. ERNI’s power and signal contacts are efficiently stamped for maximum reliablility and lower installed cost. Designed to be used by fully automatic assembly equipment, ERNI’s SMT and THR power D-Subs provide an economic solution over traditionally more expensive manually placed connectors. In applications that predominately use press fit connectors, such as backplanes, ERNI also provides a press fit power D-Sub for gas tight contact requirements.

The angled high-current D-Sub connectors are available in 3W3, 3WK3 and 7W2 configurations, and can be fitted with a maximum of three power supply contacts. However, partial assembly is also possible, as illustrated by Deutsche Telekom, which specified a 3W3 version with two contacts for a 60 V power supply. In press fit configuration, the high-current contacts are specified for a maximum current carrying capacity of 30 A (at 20 °C). The male and female multipoint connectors are supplied with the corresponding pre-installed nut or an ‘anti-twist’ interlock bolt (both available in M3 or 4#40 UNC) The RoHS-compliant power connectors are available in the standard installation height (7.3 mm), according to DIN 41652 and CECC 75301-802. For applications with a cable termination, ERNI also offers a D-Sub Power housing kit and high-current contacts with a solder or crimp connection for 10, 20, 30 and 40 A.

For fully automated assembly, ERNI’s power D-Subs are available in both an SMT-compatible tray and tape-on-reel packaging. To further simplify pick & place processing, each connector has a large intake surface for easy and reliable vacuum pick-up. Positioning pegs are located at the center of gravity to optimize connector placement during soldering. The SMT power and signal contacts utilize ‘solder traps’ to minimize the wicking effect of solder away from the pads and durable surface brackets absorb extreme mechanical forces from mating and unmating heavy cables. The tin-plated terminals are contrasted by black high temperature resistant thermoplastic for improved visual inspection.

Engineered and manufactured in Germany to the highest standards, yet priced to compete in a global marketplace, ERNI power D-Subs provide unsurpassed value and performance. Contact ERNI today for free samples.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI Electronics presents "Connector Application Wizard"

ERNI.com — 2008-04-17T03:33:00+01:00

ERNI Electronics presents "Connector Application Wizard"

The fast track to application-oriented product selection

Adelberg, April 17, 2008 – ERNI Electronics is known for its comprehensive range of products designed for the most diverse PCB connection solutions. To help simplify the selection process to match the ideal connector to the specified application, ERNI has introduced a valuable new tool. The "Connector Application Wizard" is now available at http://www.erni.com/pcb-wizard/.

In order for the Wizard to invoke its special capabilities, ERNI has divided the typical PCB configurations into four application areas:

PCBs arranged on the same level (extender card)

Stacked or parallel PCBs (mezzanine)

PCBs arranged at a right angle (motherboard-to-daughtercard)

PCB-cable connections (board-to-cable)

Each of the four applications is represented by an easily-recognizable icon which, upon selection by a prospective designer, presents an overview of the connector family applicable for the corresponding application, arranged according to pitch. A further choice from the displayed product range then limits the search result to the range selected to ensure better clarity. The final pick, from the images representing the connector pairs, swiftly delivers detailed product descriptions of the individual connectors accompanied by data sheets and dimension drawings.

One particularly useful feature of the tool enables single-click access to all counter-connectors that match the item currently shown. Another important function allows all the options to remain constantly active at the top menu level, enabling the user to move around the application or switch between product ranges at any time without the inconvenience of using the "Back" button. You are always given immediate access to the product ranges that can now be selected.

With the ever-increasing variety and scope of products, ERNI is providing its valued customers with the highest level of ease of use and flexibility in making their product selection. With the intuitive choice of corresponding application and desired pitch, developers can quickly receive an overview of the connection solutions available for their respective PCB application. This service is especially helpful for designers who are not yet familiar with the range of products available from ERNI Electronics.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI expands Universal Power Module range to include 5-pin, 6-pin and 7-pin versions

ERNI.com — 2008-04-04T03:33:00+01:00

ERNI expands Universal Power Module range to include 5-pin, 6-pin and 7-pin versions

Delivers current carrying capacity up to 18 A

Adelberg, April 04, 2008 – ERNI Electronics has upgraded its hard metric Universal Power Module (UPM) to include new 5-, 6- and 7-pin versions. These UPMs augment the existing 3-pin power modules and match their current carrying capacity of 18 A per contact (at 20°C).

These new high-performance connectors are designed to supply power in applications in line with industry standard PICMG EXP.0 CompactPCI Express (5-pin and 7-pin versions). This completes the family of connectors supplied by ERNI in accordance with the CompactPCI Express standard, and meets requirements on both the signal side (ERmet ZD, ERmet type B8) and the power side.

The angled male multipoint connectors featuring pressfit technology are designed to supply power to daughter cards in conjunction with 2mm ERmet connectors conforming to IEC 61076-4-101. Pre-mating contacts also make it possible to enable hot-swap applications. The corresponding straight female multipoint connectors are used on the backplanes. The UPMs are compatible with other 2mm and DIN 41612 connectors, and also meet the requirements for performance grade 1 and comply with RoHS.

The UPMs are available now, with lead times of 10 days. Estimated pricing begins at 2.00EUR per mated pair for volume orders of the 5pin ERmet PowerModule, 2.10EUR per mated pair for volume orders of the 6pin ERmet PowerModule and 2.20EUR per mated pair for volume orders of the 7pin ERmet PowerModule.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

Rational and Cost-Effective Board-to-Cable Solution

ERNI.com — 2008-03-17T03:33:00+01:00

Rational and Cost-Effective Board-to-Cable Solution

ERNI Electronics realizes additional space savings with the compact and economical SMC Board-on-IDC cable connector

Adelberg, March 17, 2008 – ERNI Electronics has made an even more compact version of its proven and tested board-on-IDC connector available as part of its 1.27 mm SMC series. The total height was reduced down to 5.0 mm from its previous height of 7.3 mm, and so subsequently, cable connectors can now be designed in an even more space-saving manner. In addition, the costs were significantly reduced in comparison to a conventional solution using female and male multipoint connectors. The system avoids detachable points of contact in sensitive applications. In the process, the cable is permanently attached to the connector – already soldered to the PCB – by means of the cable duct, and forms a gas-tight connection with the IDC contacts.

The new connector enables the connection between the PCB and an IDC flat cable to be established using only one connector, and allows the assembly of the flat cable to be easily and quickly performed without the need for customized tools. The connector is designed for fully-automatic SMT assembly, and is equipped with features to take advantage of this, such as a black insulating body, high temperature-resistant thermoplastic housing (LCP) for SMT reflow soldering, a pre-assembled mounting hood and tape-on-reel packaging.

The simple assembly process is performed as outlined below, using a simple hand lever press:

Remove mounting hood from the soldered connector, and mount PCB in customer-specified installation frame

Move cable duct with pre-assembled flat cable to pre-lock position

Using a flat die, press cable duct to crimp dimension. During this process, the connector must be supported on the bottom of the PCB. The data sheet provides additional information on the area and the dimensional design of the required support

The new SMT cable connector for the Board-on-IDC cable connector is available with 12, 26 or 50 pins. To promote reliable processing and a long service life, bonus features enable additional support by means of the contact underneath the connector, the pre-locking of the cable duct and the form-fitting inserted solder clips.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI Electronics Extends Capabilities of Its MicroStac Series

ERNI.com — 2008-02-29T03:33:00+01:00

ERNI Electronics Extends Capabilities of Its MicroStac Series

New subminiature connectors in 0.8 mm pitch enable board-to-board spacing of just 3 mm

Adelberg, February 29, 2008 – ERNI Electronics has expanded its MicroStac® SMT connector series to include a 0.8 mm grid with 9- and 14-pin versions. With the introduction of the 9-pin design, board-to-board spacing of only 3 mm is now possible.

The MicroStac® components are based on a patented hermaphroditic design. The connector and the counter connecter are identical, whereas the otherwise typical subdivision of male and female multipoint connectors has been omitted. The combination of the subminiature construction and the special design means that these connectors are predestined for extremely compact, but nevertheless demanding, applications. Furthermore, this range of applications is correspondingly broad – from sensor technology, medical instruments and mobile communication to automotive electronics, automation engineering, measurement technology, test equipment and building automation.

The special design and the SMT construction allow for economical and automatic assembly. The stability of the miniature components is supported by means of a tilt-proof contact principle with dual side positioning of the contact on the PCB. And, with the corresponding features of minimal weight (just 0.18 g for the 6-pin design), co-planarity of < 0.1 mm and suction areas integrated in the insulating body for the vacuum pipettes of the pick-and-place robots, the assembly can be performed through high-speed automation.

In spite of the extremely compact construction, the MicroStac® products can achieve a high current-carrying capacity, and the contact principle enables the punching of thick paneling without the bending process. As a result, large cross-sections (low ohmic resistance) and radiating surface are possible, and both enable lower self-heating than is possible with our competitors’ products. With an ambient temperature of 20 °C and current feed to all contacts, the 1.6 A (50-pin version, in acc. with IEC 60512, test 5b) can be processed safely and reliably.

Within the MicroStac® family, versions are available with 6, 9, 12,14 (all single-row) and 50 pins (two-row). They are designed for board-to-board spacing ranging from 3.0 mm to 5 mm. These subminiature connectors have a high snapping tolerance. The permissible center offset, when connected, is +/- 0.7 mm in the longitudinal direction, and the permissible angular offset is +/- 4 degrees.

As with all fine-pitch connectors that are typically produced in large quantities, the fully automatic assembly and processing are important characteristics. MicroStac® connectors feature a high temperature-resistant insulating body (PA46), and the exact co-planarity of the contacts, for example, ensures a secure soldering with all established SMT soldering processes. The black isolating body allows simple visual recognition during automatic assembly and, in the antistatic packaging, the precise contacts are protected and the connectors can be automatically loaded.

Starting with an annual requirement of 5,000 pieces, versions with additional pin counts can be made available quickly, upon customer request. For additional information on possible pin configurations, prices or delivery times, the knowledgeable and experienced ERNI sales force is available to help you.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995

ERNI Electronics Unveils ERmet ZD® Plus Family for High-Speed Designs

ERNI.com — 2008-02-04T03:33:00+01:00

ERNI Electronics Unveils ERmet ZD® Plus Family for High-Speed Designs

DesignCon2008: Enhancement of proven ERmet ZD connector system enables data rates of more than 20Gbit/s

Adelberg, Germany and Santa Clara, California, February 04, 2008 – ERNI Electronics (DesignCon 2008, Booth 624) today announced the development of a new high-speed, differential, board-to-backplane electrical connector system. The product is an enhancement of the proven ERmet ZD® family which got high market acceptance in the telecommunications and computer industries providing reliable differential solutions for applications in the range of 3-10Gbit/s. The new ERmet ZD+® high-speed differential Hard Metric connector system enables data rates of more than 20Gbit/s.

The ERmet ZD plus is based on the principal mechanical design of the ERmet ZD with the same dimensions. To enable higher data rates and further improve the crosstalk behavior ERNI Electronics has optimized the signal routing and the pressfit termination of the female connector. To benefit from the maximum performance of the new ERmet ZD plus the usage of backdrilling is recommended. Decreasing via stub length and the related “stub effect” by backdrilling significantly reduces the reflections and the overall BER (Bit Error Rate) of the interconnect.

The first product of the ERmet ZD plus family is the 4-pair right angle female connector with pressfit termination. The new ERmet ZD plus female connector is mating compatible to the existing ERmet ZD male connector. This means, that existing backplane designs do not need layout changes on the backplane side, if customers want to upgrade their systems. Of course the layout on the daughter cards has to be modified if using the new ERmet ZDplus female parts.

About ERmet ZD

ERmet ZD connectors were specially developed for differential high-speed signal transmission in telecom applications with data rates of up to 10Gbit/s. This robust, high-quality modular connector system is also very well suited for use in combination with the 2mm HM (IEC 61076-4-101) ERmet line of connectors. The special design of the signal and ground contacts ensures simple and economic conductor track routing. The ERmet ZD connector utilizes an optimal grid construction that reduces signal interference and offers more room for conductor track routing. Its optimized design and effective shielding allow the ERmet ZD system to exhibit superb performance when faced with crosstalk and reflections. Signal and ground contacts have different connection levels, ensuring reliable mating.

The new ERmet ZD plus connectors now enable even higher data rates and the daughter cards can be used within existing backplane systems.

About ERNI Electronics

Download Highres

Agency Contact Europe

MEXPERTS AG
Rolf Bach
Trimburgstraße 2
81249 München

Tel. +49 (0)89/897361-14
Fax +49 (0)89/897361-29

Internet: www.mexperts.de

Agency Contact USA & Asia Pacific

TechWire International
118 Younger Way
Santa Cruz, CA 95060

Phone: +1 831-429-6288
Fax: +1 831-429-6920

Internet: www.ezwire.com

Company Contact Europe

ERNI Electronics GmbH
Magnus Henzler
Seestrasse 9
73099 Adelberg
Germany

Tel.: +49 (0)7166 / 50-583
Fax: +49 (0)7166 / 50-103

Company Contact USA

ERNI Electronics, Inc.
3005 E. Boundary Terrace
Midlothian, VA 23112

Phone +1 804-228-4100
Fax +1 804-228-4099

Company Contact Asia Pacific

ERNI Asia Holding Pte Ltd
YH Koh
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625

Phone +65 6 555 5885
Fax +65 6 555 5995